Pk Paperka
All guides

Guides

A paper kit for a sewing project: from measurements to fitting

This is one paper trail for one project: a skirt with pockets. It does not replace the pattern or decide how the garment should fit. It keeps the facts and decisions you need beside the printed pattern, from the first measurements through the next fitting.

1. Measure: four rows, kept private

Choose the Skirt preset. Its four rows follow the skirt guide: waist is the body measurement at the marked natural waist; hips are taken at the fullest level; waist-to-hip depth places that fullest level vertically; skirt length runs from the side waist to the chosen hem. Read the Nastix Patterns skirt measurements guide.

Body measurements Record values in cm; keep this sheet with the matching pattern. Measurement Date / person (cm) Date / person (cm) Waist Around the waist elastic, level and snug without compression. Hips Around the fullest seat, with the tape level. Waist to hip depth Down the side from the waist elastic to the fullest hip line. Skirt length From the side waist elastic over the hip to the chosen hem. Notes
The real sheet with the Skirt preset, as the tool prints it.

The page is deliberately blank. Write the values on paper, then keep the sheet with this project; Paperka receives page choices, not the values or names you write.

Open the Skirt measurement sheet

2. Draft: enter the recorded values

Enter the recorded values in the skirt generator, then keep its pattern name or version with the paper set. Open the Nastix Patterns skirt generator.

3. Plan: use the skirt-with-pockets example

The editable planner example carries the published shell-fabric figure exactly as stated: 0.8–1.2 m plus about 0.15 m for the waistband and loops, for an adult knee-length skirt on 150 cm-wide goods. The generators size pieces, not yardage; this is a working figure, so lay out your printed pieces before buying. Pocket bags and interfacing remain references to your pattern. Choose the closure before cutting. Read the Nastix Patterns Skirt with Pockets project.

Skirt with pockets Sewing Tools / sizes Sewing machine; iron; pattern pieces Measurements / units Adult; knee-length; 150 cm-wide fabric Pattern / version Nastix Patterns — Skirt with Pockets project Materials and colour key Material / colour Code / lot / symbol Amount / unit Shell fabric 0.8–1.2 m + 0.15 m Pocket bags From your pattern Interfacing From your pattern Closure (zip / hook / button) — choose before cutting From your pattern My steps Prepare the pattern pieces Pre-wash and press the fabric Cut and mark the pieces Sew the main seams Check the first fitting Adjust the construction notes Finish edges and closures Press and record the final details Where I stopped / changes Next action / finishing notes
The real planner sheet for the Skirt with pockets example, ready to edit or download.
Open and edit the skirt planner example Download the skirt planner PDF

4. Fit: log what happened, without prescribing a fix

Open the Skirt preset for each fitting round. The blank sheet separates the project, pattern source and version, base measurements, test fabric, date, version, and stage from the observation, later change, and result at the next fitting. It is a record, not fitting advice.

Fitting and pattern change log Keep this log with the measurement sheet and printed pattern. Project Pattern source and version Base size / measurements used Fabric used for this test Fitting entry 1 Date Pattern version Stage toile first final Area Waist Hips Side seam Hem / length What I observed Change made to the pattern (where and how much) Result at the next fitting Fitting entry 2 Date Pattern version Stage toile first final Area Waist Hips Side seam Hem / length What I observed Change made to the pattern (where and how much) Result at the next fitting
The real blank fitting log with the Skirt preset; write each fitting round by hand.

Give each change a new version; record its location and amount in the pattern’s unit; name the test fabric; write what you observed before deciding on a change; and store the log with the measurement sheet and printed pattern.

Open the Skirt fitting log

5. Keep the kit together

Write the same project name on the measurement sheet, planner, fitting log, and printed pattern. Add a version number whenever the pattern changes, and store the completed sheets with the pattern PDF or printout and the project materials.

What this kit does not do

Paperka does not convert measurements, calculate a pattern, estimate yardage, or give fit advice. It never receives the values you write. Nastix Patterns remains the source for the skirt guide, generator, and project instructions.

Try it on paper

Printable tools from this guide